Protect My

Ohio Metal Shop Fire Prevention

Metal fabrication shops seldom consider a fire happening at their business. This is understandable because in most cases the building is usually metal and the core materials they work with do not burn. However, fires can and do happen at metal shops. For instance, a fire recently destroyed Metal Shop in Colorado

The truth is, most firefighters are concerned about explosions and the toxic chemical smoke that can being released in the air during a metal shop fire. In addition, metal shops typically use assorted gases for cutting and shaping the metal. All these have extremely flammable properties. Oily rags, solvents, cutting oils and other flammable solutions, all have the potential to create very hazardous smoke and fire –especially when combined with bad wiring.

Therefore, fabrication shop owners need to stay alert to the causes of fire at their business. Fire safety is something they should not overlook no matter how busy they are. With all the oils, gases, and chemicals in and around their business even a simple flare-up can turn into a dangerous, deadly, and costly blaze, in just moments. Workers can suffer debilitation injuries that can be costly or even life threatening.

The best way to incorporate fire safety rules into your business is to include them with your other safety guidelines. Then, have employees learn them and be aware of just how easily one small spark can cause a really big fire.

Below are some Metal Shop Fire Prevention suggestions that you can consider for your business.

1910 Subpart A – General

• 1910.1 – Purpose and scope.

• 1910.2 – Definitions.

• 1910.3 – Petitions for the issuance, amendment, or repeal of a standard.

• 1910.4 – Amendments to this part.

• 1910.5 – Applicability of standards.

• 1910.6 – Incorporation by reference.

• 1910.7 – Definition and requirements for a nationally recognized testing laboratory.

• 1910.7 App A – OSHA Recognition Process for Nationally Recognized Testing Laboratories.

• 1910.8 – OMB control numbers under the Paperwork Reduction Act.

• 1910.9 – Compliance duties owed to each employee.

1910 Subpart B – Adoption and Extension of Established Federal Standards

• 1910.11 – Scope and purpose.

• 1910.12 – Construction work.

• 1910.15 – Shipyard employment.

• 1910.16 – Longshoring and marine terminals.

• 1910.17 – Effective dates.

• 1910.18 – Changes in established Federal standards.

• 1910.19 – Special provisions for air contaminants.

1910 Subpart C – Adoption and Extension of Established Federal Standards

1910 Subpart D – Walking-Working Surfaces

• 1910.21 – Definitions.

• 1910.22 – General requirements.

• 1910.23 – Guarding floor and wall openings and holes.

• 1910.24 – Fixed industrial stairs.

• 1910.25 – Portable wood ladders.

• 1910.26 – Portable metal ladders.

• 1910.27 – Fixed ladders.

• 1910.28 – Safety requirements for scaffolding.

• 1910.29 – Manually propelled mobile ladder stands and scaffolds (towers).

• 1910.30 – Other working surfaces.

1910 Subpart E – Means of Egress

• 1910 Subpart E App – Exit Routes, Emergency Action Plans, and Fire Prevention Plans.

• 1910.33 – Table of contents.

• 1910.34 – Coverage and definitions.

• 1910.35 – Compliance with alternate exit-route codes.

• 1910.36 – Design and construction requirements for exit routes.

• 1910.37 – Maintenance, safeguards, and operational features for exit routes.

• 1910.38 – Emergency action plans.

• 1910.39 – Fire prevention plans.

1910 Subpart F – Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms

• 1910.66 – Powered platforms for building maintenance.

• 1910.66 App A – Guidelines (Advisory)

• 1910.66 App B – Exhibits (Advisory)

• 1910.66 App C – Personal Fall Arrest System (Section I – Mandatory; Sections II and III – Non-Mandatory)

• 1910.66 App D – Existing Installations (Mandatory)

• 1910.67 – Vehicle-mounted elevating and rotating work platforms.

• 1910.68 – Manlifts.

1910 Subpart G – Occupational Health and Environmental Control

• 1910.94 – Ventilation.

• 1910.95 – Occupational noise exposure.

• 1910.95 App A – Noise exposure computation

• 1910.95 App B – Methods for estimating the adequacy of hearing protector attenuation

• 1910.95 App C – Audiometric measuring instruments

• 1910.95 App D – Audiometric test rooms

• 1910.95 App E – Acoustic calibration of audiometers

• 1910.95 App F – Calculations and application of age corrections to audiograms

• 1910.95 App G – Monitoring noise levels non-mandatory informational appendix

• 1910.95 App H – Availability of referenced documents

• 1910.95 App I – Definitions

• 1910.97 – Nonionizing radiation.

• 1910.98 – Effective dates.

1910 Subpart H – Hazardous Materials

• 1910.101 – Compressed gases (general requirements).

• 1910.102 – Acetylene.

• 1910.103 – Hydrogen.

• 1910.104 – Oxygen.

• 1910.105 – Nitrous oxide.

• 1910.106 – Flammable and combustible liquids.

• 1910.107 – Spray finishing using flammable and combustible materials.

• 1910.108 – [Reserved]

• 1910.109 – Explosives and blasting agents.

• 1910.110 – Storage and handling of liquefied petroleum gases.

• 1910.111 – Storage and handling of anhydrous ammonia.

• 1910.112 – [Reserved]

• 1910.113 – [Reserved]

• 1910.119 – Process safety management of highly hazardous chemicals.

• 1910.119 App A – List of Highly Hazardous Chemicals, Toxics and Reactives (Mandatory).

• 1910.119 App B – Block Flow Diagram and Simplified Process Flow Diagram (Nonmandatory).

• 1910.119 App C – Compliance Guidelines and Recommendations for Process Safety Management (Nonmandatory).

• 1910.119 App D – Sources of Further Information (Nonmandatory).

• 1910.120 – Hazardous waste operations and emergency response.

• 1910.120 App A – Personal protective equipment test methods.

• 1910.120 App B – General description and discussion of the levels of protection and protective gear.

• 1910.120 App C – Compliance guidelines.

• 1910.120 App D – References.

• 1910.120 App E – Training Curriculum Guidelines – (Non-mandatory)

• 1910.121 – Reserved

• 1910.122 – Table of contents

• 1910.123 – Dipping and coating operations: Coverage and definitions

• 1910.124 – General requirements for dipping and coating operations

• 1910.125 – Additional requirements for dipping and coating operations that use flammable or combustible liquids

• 1910.126 – Additional requirements for special dipping and coating operations

1910 Subpart I – Personal Protective Equipment

• 1910.132 – General requirements.

• 1910.133 – Eye and face protection.

• 1910.134 – Respiratory Protection.

• 1910.134 App A – Fit Testing Procedures (Mandatory).

• 1910.134 App B-1 – User Seal Check Procedures (Mandatory).

• 1910.134 App B-2 – Respirator Cleaning Procedures (Mandatory).

• 1910.134 App C – OSHA Respirator Medical Evaluation Questionnaire (Mandatory).

• 1910.134 App D – (Mandatory) Information for Employees Using Respirators When not Required Under Standard.

• 1910.135 – Head protection.

• 1910.136 – Foot protection.

• 1910.137 – Electrical protective devices.

• 1910.138 – Hand Protection.

• 1910 Subpart I App A – References for further information (Non-mandatory)

• 1910 Subpart I App B – Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection.

1910 Subpart J – General Environmental Controls

• 1910.141 – Sanitation.

• 1910.142 – Temporary labor camps.

• 1910.143 – Nonwater carriage disposal systems. [Reserved]

• 1910.144 – Safety color code for marking physical hazards.

• 1910.145 – Specifications for accident prevention signs and tags.

• 1910.145(f) App A – Recommended color coding

• 1910.145(f) App B – References for further information

• 1910.146 – Permit-required confined spaces

• 1910.146 App A – Permit-required Confined Space Decision Flow Chart

• 1910.146 App B – Procedures for Atmospheric Testing.

• 1910.146 App C – Examples of Permit-required Confined Space Programs

• 1910.146 App D – Confined Space Pre-Entry Check List

• 1910.146 App E – Sewer System Entry.

• 1910.146 App F – Non-Mandatory Appendix F — Rescue Team or Rescue Service Evaluation Criteria

• 1910.147 – The control of hazardous energy (lockout/tagout).

• 1910.147 App A – Typical minimal lockout procedures

1910 Subpart K – Medical and First Aid

• 1910.151 – Medical services and first aid.

• 1910.151 App A – Appendix A to § 1910.151 — First aid kits (Non-Mandatory)

• 1910.152 – [Reserved]

1910 Subpart L – Fire Protection

• 1910.155 – Scope, application and definitions applicable to this subpart.

• 1910.156 – Fire brigades.

• 1910.157 – Portable fire extinguishers.

• 1910.158 – Standpipe and hose systems.

• 1910.159 – Automatic sprinkler systems.

• 1910.160 – Fixed extinguishing systems, general.

• 1910.161 – Fixed extinguishing systems, dry chemical.

• 1910.162 – Fixed extinguishing systems, gaseous agent.

• 1910.163 – Fixed extinguishing systems, water spray and foam.

• 1910.164 – Fire detection systems.

• 1910.165 – Employee alarm systems.

• 1910 Subpart L App A – Fire Protection

• 1910 Subpart L App B – National Consensus Standards

• 1910 Subpart L App C – Fire Protection references for further information

• 1910 Subpart L App D – Availability of publications incorporated by reference in section 1910.156 fire brigades

• 1910 Subpart L App E – Test methods for protective clothing

1910 Subpart M – Compressed Gas and Compressed Air Equipment

• 1910.166 – [Reserved]

• 1910.167 – [Reserved]

• 1910.168 – [Reserved]

• 1910.169 – Air receivers.

1910 Subpart N – Materials Handling and Storage

• 1910.176 – Handling materials – general.

• 1910.177 – Servicing multi-piece and single piece rim wheels.

• 1910.177 App A – Trajectory

• 1910.177 App B – Ordering information for NHTSA charts

• 1910.178 – Powered industrial trucks.

• 1910.178 App A – Powered industrial trucks.

• 1910.179 – Overhead and gantry cranes.

• 1910.180 – Crawler locomotive and truck cranes.

• 1910.181 – Derricks.

• 1910.183 – Helicopters.

• 1910.184 – Slings.

1910 Subpart O – Machinery and Machine Guarding

• 1910.211 – Definitions.

• 1910.212 – General requirements for all machines.

• 1910.213 – Woodworking machinery requirements.

• 1910.214 – Cooperage machinery. [Reserved]

• 1910.215 – Abrasive wheel machinery.

• 1910.216 – Mills and calenders in the rubber and plastics industries.

• 1910.217 – Mechanical power presses.

• 1910.217 App A – Mandatory requirements for certification/validation of safety systems for presence sensing device initiation of mechanical power presses

• 1910.217 App B – Nonmandatory guidelines for certification/validation of safety systems for presence sensing device initiation of mechanical power presses

• 1910.217 App C – Mandatory requirements for OSHA recognition of third-party validation organizations for the PSDI standard

• 1910.217 App D – Nonmandatory supplementary information

• 1910.218 – Forging machines.

• 1910.219 – Mechanical power-transmission apparatus.

1910 Subpart P – Hand and Portable Powered Tools and Other Hand-Held Equipment

• 1910.241 – Definitions.

• 1910.242 – Hand and portable powered tools and equipment, general.

• 1910.243 – Guarding of portable powered tools.

• 1910.244 – Other portable tools and equipment.

1910 Subpart Q – Welding, Cutting, and Brazing

• 1910.251 – Definitions.

• 1910.252 – General requirements.

• 1910.253 – Oxygen-fuel gas welding and cutting.

• 1910.254 – Arc welding and cutting.

• 1910.255 – Resistance welding.

1910 Subpart R – Special Industries

• 1910.261 – Pulp, paper, and paperboard mills.

• 1910.262 – Textiles.

• 1910.263 – Bakery equipment.

• 1910.264 – Laundry machinery and operations.

• 1910.265 – Sawmills.

• 1910.266 – Logging operations.

• 1910.266 App A – First-aid Kits (Mandatory).

• 1910.266 App B – First-aid and CPR Training (Mandatory).

• 1910.266 App C – Comparable ISO Standards (Non-mandatory)

• 1910.268 – Telecommunications.

• 1910.269 – Electric Power Generation, Transmission, and Distribution.

• 1910.269 App A – Flow Charts.

• 1910.269 App B – Working on Exposed Energized Parts.

• 1910.269 App C – Protection from Step and Touch Potentials.

• 1910.269 App D – Methods of Inspecting and Testing Wood Poles.

• 1910.269 App E – Reference Documents.

• 1910.272 – Grain handling facilities.

• 1910.272 App A – Grain handling facilities

• 1910.272 App B – National consensus standards

• 1910.272 App C – References for further information

1910 Subpart S – Electrical

• 1910.301 – Introduction.

• 1910.302 – Electric utilization systems.

• 1910.303 – General.

• 1910.304 – Wiring design and protection.

• 1910.305 – Wiring methods, components, and equipment for general use.

• 1910.306 – Specific purpose equipment and installations.

• 1910.307 – Hazardous (classified) locations.

• 1910.308 – Special systems.

• 1910.309 – [Reserved]

• 1910.310 – [Reserved]

• 1910.311 – [Reserved]

• 1910.312 – [Reserved]

• 1910.313 – [Reserved]

• 1910.314 – [Reserved]

• 1910.315 – [Reserved]

• 1910.316 – [Reserved]

• 1910.317 – [Reserved]

• 1910.318 – [Reserved]

• 1910.319 – [Reserved]

• 1910.320 – [Reserved]

• 1910.321 – [Reserved]

• 1910.322 – [Reserved]

• 1910.323 – [Reserved]

• 1910.324 – [Reserved]

• 1910.325 – [Reserved]

• 1910.326 – [Reserved]

• 1910.327 – [Reserved]

• 1910.328 – [Reserved]

• 1910.329 – [Reserved]

• 1910.330 – [Reserved]

• 1910.331 – Scope

• 1910.332 – Training

• 1910.333 – Selection and use of work practices

• 1910.334 – Use of equipment.

• 1910.335 – Safeguards for personnel protection.

• 1910.336 – [Reserved]

• 1910.337 – [Reserved]

• 1910.338 – [Reserved]

• 1910.339 – [Reserved]

• 1910.340 – [Reserved]

• 1910.341 – [Reserved]

• 1910.342 – [Reserved]

• 1910.343 – [Reserved]

• 1910.344 – [Reserved]

• 1910.345 – [Reserved]

• 1910.346 – [Reserved]

• 1910.347 – [Reserved]

• 1910.348 – [Reserved]

• 1910.349 – [Reserved]

• 1910.350 – [Reserved]

• 1910.351 – [Reserved]

• 1910.352 – [Reserved]

• 1910.353 – [Reserved]

• 1910.354 – [Reserved]

• 1910.355 – [Reserved]

• 1910.356 – [Reserved]

• 1910.357 – [Reserved]

• 1910.358 – [Reserved]

• 1910.359 – [Reserved]

• 1910.360 – [Reserved]

• 1910.361 – [Reserved]

• 1910.362 – [Reserved]

• 1910.363 – [Reserved]

• 1910.364 – [Reserved]

• 1910.365 – [Reserved]

• 1910.366 – [Reserved]

• 1910.367 – [Reserved]

• 1910.368 – [Reserved]

• 1910.369 – [Reserved]

• 1910.370 – [Reserved]

• 1910.371 – [Reserved]

• 1910.372 – [Reserved]

• 1910.373 – [Reserved]

• 1910.374 – [Reserved]

• 1910.375 – [Reserved]

• 1910.376 – [Reserved]

• 1910.377 – [Reserved]

• 1910.378 – [Reserved]

• 1910.379 – [Reserved]

• 1910.380 – [Reserved]

• 1910.381 – [Reserved]

• 1910.382 – [Reserved]

• 1910.383 – [Reserved]

• 1910.384 – [Reserved]

• 1910.385 – [Reserved]

• 1910.386 – [Reserved]

• 1910.387 – [Reserved]

• 1910.388 – [Reserved]

• 1910.389 – [Reserved]

• 1910.390 – [Reserved]

• 1910.391 – [Reserved]

• 1910.392 – [Reserved]

• 1910.393 – [Reserved]

• 1910.394 – [Reserved]

• 1910.395 – [Reserved]

• 1910.396 – [Reserved]

• 1910.397 – [Reserved]

• 1910.398 – [Reserved]

• 1910.399 – Definitions applicable to this subpart.

• 1910 Subpart S App A – Reference Documents

1910 Subpart T – Commercial Diving Operations

• 1910.401 – Scope and application.

• 1910.402 – Definitions.

• 1910.410 – Qualifications of dive team.

• 1910.420 – Safe practices manual.

• 1910.421 – Pre-dive procedures.

• 1910.422 – Procedures during dive.

• 1910.423 – Post-dive procedures.

• 1910.424 – SCUBA diving.

• 1910.425 – Surface-supplied air diving.

• 1910.426 – Mixed-gas diving.

• 1910.427 – Liveboating.

• 1910.430 – Equipment.

• 1910.440 – Recordkeeping requirements.

• 1910 Subpart T App A – Examples of conditions which may restrict or limit exposure to hyperbaric conditions

• 1910 Subpart T App B – Guidelines for scientific diving

• 1910 Subpart T App C – Alternative Conditions Under 1910.401(a)(3) for Recreational Diving Instructors and Diving Guides (Mandatory)

1910 Subpart U – [Reserved]

1910 Subpart V – [Reserved]

1910 Subpart W – Program Standard

1910 Subpart X – [Reserved]

1910 Subpart Y – [Reserved]

1910 Subpart Z – Toxic and Hazardous Substances

• 1910.1000 – Air contaminants.

• 1910.1000 TABLE Z-1 – TABLE Z-1 Limits for Air Contaminants.

• 1910.1000 TABLE Z-2 – TABLE Z-2

• 1910.1000 TABLE Z-3 – TABLE Z-3 Mineral Dusts

• 1910.1001 – Asbestos.

• 1910.1001 App A – OSHA Reference Method – Mandatory

• 1910.1001 App B – Detailed procedure for asbestos sampling and analysis – Non-Mandatory

• 1910.1001 App C – Qualitative and quantitative fit testing procedures – Mandatory

• 1910.1001 App D – Medical questionnaires; Mandatory

• 1910.1001 App E – Interpretation and classification of chest roentgenograms – Mandatory

• 1910.1001 App F – Work practices and engineering controls for automotive brake and clutch inspection, disassembly, repair and assembly — Mandatory

• 1910.1001 App G – Substance technical information for asbestos – Non-Mandatory

• 1910.1001 App H – Medical surveillance guidelines for asbestos – Non-Mandatory

• 1910.1001 App I – Smoking Cessation Program Information For Asbestos – Non-Mandatory.

• 1910.1001 App J – Polarized Light Microscopy of Asbestos — Non-Mandatory

• 1910.1002 – Coal tar pitch volatiles; interpretation of term.

• 1910.1003 – 13 Carcinogens (4-Nitrobiphenyl, etc.).

• 1910.1004 – alpha-Naphthylamine.

• 1910.1005 – [Reserved]

• 1910.1006 – Methyl chloromethyl ether.

• 1910.1007 – 3,’-Dichlorobenzidine (and its salts).

• 1910.1008 – bis-Chloromethyl ether.

• 1910.1009 – beta-Naphthylamine.

• 1910.1010 – Benzidine.

• 1910.1011 – 4-Aminodiphenyl.

• 1910.1012 – Ethyleneimine.

• 1910.1013 – beta-Propiolactone.

• 1910.1014 – 2-Acetylaminofluorene.

• 1910.1015 – 4-Dimethylaminoazobenzene.

• 1910.1016 – N-Nitrosodimethylamine.

• 1910.1017 – Vinyl chloride.

• 1910.1017 App A – Supplemental medical information

• 1910.1018 – Inorganic arsenic.

• 1910.1018 App A – Inorganic arsenic substance information sheet

• 1910.1018 App B – Substance technical guidelines

• 1910.1018 App C – Medical surveillance guidelines

• 1910.1020 – Access to employee exposure and medical records.

• 1910.1020 App A – Sample authorization letter for the release of employee medical record information to a designated representative (Non-mandatory)

• 1910.1020 App B – Availability of NIOSH registry of toxic effects of chemical substances (RTECS)(Non-mandatory)

• 1910.1025 – Lead.

• 1910.1025 App A – Substance data sheet for occupational exposure to lead

• 1910.1025 App B – Employee standard summary

• 1910.1025 App C – Medical surveillance guidelines

• 1910.1025 App D – Qualitative fit test protocols

• 1910.1026 – Chromium (VI)

• 1910.1026 App A – Chromium (VI)

• 1910.1027 – Cadmium

• 1910.1027 App A – Substance Safety Data Sheet – Cadmium

• 1910.1027 App B – Substances Technical Guidelines for Cadmium

• 1910.1027 App C – Qualitative and Quantitative Fit Testing Procedures

• 1910.1027 App D – Occupational Health History Interview With Reference to Cadmium Exposure

• 1910.1027 App E – Cadmium in Workplace Atmospheres

• 1910.1027 App F – Nonmandatory Protocol for Biological Monitoring

• 1910.1028 – Benzene.

• 1910.1028 App A – Substance safety data sheet, Benzene

• 1910.1028 App B – Substance technical guidelines, Benzene

• 1910.1028 App C – Medical surveillance guidelines for Benzene

• 1910.1028 App D – Sampling and analytical methods for Benzene monitoring and measurement procedures

• 1910.1028 App E – Qualitative and Quantitative fit testing procedures

• 1910.1029 – Coke oven emissions.

• 1910.1029 App A – Coke oven emissions substance information sheet

• 1910.1029 App B – Industrial hygiene and medical surveillance guidelines

• 1910.1030 – Bloodborne pathogens.

• 1910.1030 App A – Hepatitis B Vaccine Declination (Mandatory)

• 1910.1043 – Cotton dust.

• 1910.1043 App A – Air sampling and analytical procedures for determining concentrations of cotton dust

• 1910.1043 App B-I – Respiratory questionnaire

• 1910.1043 App B-II – Respiratory questionnaire for non-textile workers for the cotton industry

• 1910.1043 App B-III – Abbreviated respiratory questionnaire

• 1910.1043 App C – Spirometry prediction tables for normal males and females

• 1910.1043 App D – Pulmonary function standards for cotton dust standard

• 1910.1043 App E – Vertical elutriator equivalency protocol

• 1910.1044 – 1,2-dibromo-3-chloropropane.

• 1910.1044 App A – Substance safety data sheet for DBCP

• 1910.1044 App B – Substance technical guidelines for DBCP

• 1910.1044 App C – Medical surveillance guidelines for DBCP

• 1910.1045 – Acrylonitrile.

• 1910.1045 App A – Substance safety data sheet for acrylonitrile

• 1910.1045 App B – Substance technical guidelines for acrylonitrile

• 1910.1045 App C – Medical surveillance guidelines for acrylonitrile

• 1910.1045 App D – Sampling and analytical methods for acrylonitrile

• 1910.1047 – Ethylene oxide.

• 1910.1047 App A – Substance safety data sheet for ethylene oxide (non-mandatory)

• 1910.1047 App B – Substance technical guidelines for ethylene oxide (Non-mandatory)

• 1910.1047 App C – Medical surveillance guidelines for ethylene oxide (Non-mandatory)

• 1910.1047 App D – Sampling and analytical methods for ethylene oxide (Non-mandatory)

• 1910.1048 – Formaldehyde.

• 1910.1048 App A – Substance technical guidelines for formalin

• 1910.1048 App B – Sampling strategy and analytical methods for formaldehyde

• 1910.1048 App C – Medical surveillance – Formaldehyde

• 1910.1048 App D – Nonmandatory medical disease questionnaire

• 1910.1048 App E – Qualitative and quantitative fit testing procedures

• 1910.1050 – Methylenedianiline

• 1910.1050 App A – Substance Data Sheet, for 4,4′-Methylenedianiline

• 1910.1050 App B – Substance Technical Guidelines, MDA

• 1910.1050 App C – Medical Surveillance Guidelines for MDA

• 1910.1050 App D – Sampling and Analytical Methods for MDA Monitoring and Measurement Procedures

• 1910.1050 App E – Qualitative and Quantitive Fit Testing Procedures

• 1910.1051 – 1,3-Butadiene.

• 1910.1051 App A – Substance Safety Data Sheet For 1,3-Butadiene (Non-Mandatory)

• 1910.1051 App B – Substance Technical Guidelines for 1,3-Butadiene (Non-Mandatory)

• 1910.1051 App C – Medical Screening and Surveillance for 1,3-Butadiene (Non-Mandatory)

• 1910.1051 App D – Sampling and Analytical Method for 1,3-Butadiene (Non-Mandatory)

• 1910.1051 App E – Respirator Fit Testing Procedures (Mandatory)

• 1910.1051 App F – Medical Questionnaires, (Non-mandatory)

• 1910.1052 – Methylene Chloride.

• 1910.1052 App A – Substance Safety Data Sheet and Technical Guidelines for Methylene Chloride.

• 1910.1052 App B – Medical Surveillance for Methylene Chloride.

• 1910.1052 App C – Questions and Answers – Methylene Chloride Control in Furniture Stripping.

• 1910.1096 – Ionizing radiation.

• 1910.1200 – Hazard Communication.

• 1910.1200 App A – Health Hazard Definitions (Mandatory)

• 1910.1200 App B – Hazard determination (Mandatory)

• 1910.1200 App C – Information sources (Advisory)

• 1910.1200 App D – Definition of “Trade Secret” (Mandatory)

• 1910.1200 App E – Guidelines for Employer Compliance (Advisory)

• 1910.1201 – Retention of DOT markings, placards and labels.

• 1910.1450 – Occupational exposure to hazardous chemicals in laboratories.

• 1910.1450 App A – National Research Council Recommendations Concerning Chemical Hygiene in Laboratories (Non-Mandatory)

• 1910.1450 App B – References (Non-Mandatory)

A good Metal Shop Fire Prevention program can also help shop owners lower their insurance. To find out more about how you can save up to 37 and a half percent on your metal shop insurance use the more information box at the top right.